Chlorine Feeder CL-220 Hose Connector

Chlorine Feeder CL-220 Hose Connector is high capacity feeders offer user-friendly solution for sanitizing large residential and commercial swimming pool using either chlorine or bromine tablets. They are heavy duty and able to provide automatic sanitization for pools up to 608000 litres. Both in-line and off-line plumbing installations available in 2 sizes. This feeder can only be used with slow-dissolving trichlor and  do not mix with other type of chlorine or chemical, otherwise it may cause explosion or fire.

Youtube Video：Chlorine Feeder CL-200 Hose Connector

Other Models：Chlorine Feeder

To open:

1. Firstly,shut off pump and turn DIAL CONTROL VALVE to OFF, Shut off any other in-line valves to prevent backflow,if  applicable,wait one minute.

2. Secondly,turn the LID counter-clockwise to open. Caution: do not inhale fumes from chlorine feeder.

To close:

1. Firstly,press the LID, with o-ring seal, firmly onto BODY. Engage the LID threads and turn clockwise to stop lug.

2. Secondly,place DIAL CONTROL VALVE to desired setting, open In-line valves and re-start pump.

INSTALLATION OFPCE03 ( IN-LINE )

1. The automatic Chlorine Feeder CL-220 Hose Connector is for permanent installation in the pool water return line.

2. Always install chlorine feeder after the heater. If there is no heater, install after the filter. Damage to the heater or filter may result if concentrated chlorine is allowed to flow through them.

3. The chlorinator is furnished with 1 1/2" female threads. Socket adapters may also be used.

4. Use pipe thresd sealants formulated and approved for the use with plastic connections Do not over tighten.

5. The preferred installation is above water level and located in line below filter or heater outlets. An in-line positive seal corrosion resistant check valve should be installed to reduce backflow of chlorine gas when the system is shut off. If the chlorine feeder must be located below water level, provide a check valve to prevent water backflow when opening/servicing the unit.